Invacare Mobility Aid Growth Bracket User Manual

GrowthBracket  
Assembly, Installation and Operating Instructions  
SAFETY SUMMARY  
WARNING  
DO NOT insta ll this e quipme nt without first re a d-  
ing a nd understa nding this instruction sheet. If you  
a re una ble to understa nd these instructions, con-  
ta c t a he a lthc a re profe ssiona l, de a le r or te c hni-  
c a l pe rsonne l if a pplic a ble be fore a tte mpting  
to insta ll this equipment - otherwise, injury or da m-  
a ge ma y oc c ur.  
Curved  
Back  
Center Panel  
Top Set  
Six (6) T-nutted  
mounting holes  
Bottom Set  
Ensure tha t the se a t is fixe d to the whe e lc ha ir. A  
loose se a t ma y le a d to pote ntia lly da nge rous  
situa tions with positioning de vic e s.  
Mounting  
Screws  
Ulti-Mate  
Base  
ATTACHING/ ADJ USTING THE  
FIXED GROWTH BRACKET  
Growth Bracket  
Adjustment  
holes  
Attaching the Growth Bracket  
FIGURE 1 - ATTACHING/ADJUSTING THE  
FIXED GROWTH BRACKET  
NOTE: The growth bracket attaches to the Child/Junior  
Size Curved Back only.  
Adjusting the Growth Bracket  
(FIGURE 1)  
1. Remove the growth bracket and attaching hardware  
from packaging.  
ADJ USTING THE BACK HEIGHT.  
1. If necessary, unzip center panel of the back cover.  
2. Unzip center panel of the back cover, exposing the  
six (6) T-nutted mounting holes.  
2. Remove the four (4) mounting screws that secure  
the growth bracket to the back.  
NOTE: Make sure the growth bracket is positioned cor-  
rectly. The flat portion of the growth bracket provides  
depth adjustment for the Ulti-Mate Base. The angled  
portion of the growth bracket provides height adjustment  
for the Curved Back. See FIGURE 1.  
3. Adjust the back up or down until the desired mount-  
ing position is obtained.  
4. Reinstall the four (4) mounting screws through the  
growth bracket and into the back shell. Securely  
tighten. Refer to the FIGURE 2- ATTACHMENT  
POINTS in this instruction sheet for standard and  
optional attachment points.  
3. Install four (4) of the mounting screws through the  
holes in the growth bracket and into the back shell.  
Securely tighten.  
NOTE: On the curved back, the standard attachment  
points are the top and bottom sets of holes. Refer to the  
FIGURE 2-ATTACHMENT POINTS in this instruction  
sheet for optional attachment points.  
5. Zip center panel of back cover closed.  
ADJ USTING THE ULTI-MATE BASE  
DEPTH.  
1. Remove the four (4) mounting screws that secure  
the growth bracket to the Ulti-Mate Base.  
4. Install four (4) of the mounting screws through the  
holes in the growth bracket and into the underside of  
the Ulti-Mate Base. Securely tighten.  
2. Adjust the seat forward or back until the desired  
mounting position is obtained.  
NOTE: On the Ulti-Mate Base, the standard attachment  
points are the front and back sets of holes. Refer to the  
FIGURE 2-ATTACHMENT POINTS in this instruction  
sheet for optional attachment points.  
3. Reinstall the four (4) mounting screws through the  
growth bracket and into the seat. Securely tighten.  
Refer to the FIGURE 2 - ATTACHMENT POINTS In  
this instruction sheet for standard and optional at-  
tachment points.  
5. If adjustment is required, refer to ADJUSTING THE  
GROWTH BRACKET in this instruction sheet.  
1
 
5. Ifmoreadjustmentisneeded, theadjustmentscrews  
can be completely removed, and the bracket set to  
a NEW T-nutted hole location. Refer to the  
FIGURE 2 - ATTACHMENT POINTS in this instruc-  
tion sheet for optional attachment points.  
ADJ USTING THE ANGLE OF THE BACK  
(FIGURE 4 ).  
NOTE: The adjustable angle growth bracket is infinitely  
angle adjustable. The back-to-seat angle is set by the  
location of the mounting points for the back in relation to  
the base and by changing the hole positions of the ad-  
justable angle back hooks.  
6. Zip center panel of back cover closed.  
ADJ USTING THE ULTI-MATE BASE  
DEPTH.  
1. If necessary, unzip center panel of the back cover.  
1. Remove the two (2) attaching screws and nuts on  
the adjustable angle back hooks.  
2. Recline the back to the desired angle.  
2. Loosen the four (4) mounting screws that secure  
the growth bracket to the Ulti-Mate Base.  
3. Align one (1) round hole and one (1) slotted hole on  
the back L-bracket with two (2) of the holes on the  
hook portion.  
3. Adjust the seat forward or back until the desired  
mounting position is obtained.  
4. Reinstall the two (2) screws and nuts and securely  
tighten.  
4. Securely tighten the two (2) mounting screws.  
5. Ifmoreadjustmentisneeded, theadjustmentscrews  
can be completely removed, and the bracket set to  
a NEW T-nutted hole location. Refer to the  
FIGURE 2 - ATTACHMENT POINTS in this instruc-  
tion sheet for optional attachment points.  
Hook Portion  
6. Zip center panel of back cover closed.  
Nuts  
L-Bracket  
Attaching Screws  
FIGURE 4 - ADJUSTING THE ANGLE OF  
THE BACK  
Top Mounting  
Screws  
Bottom Mounting  
Screws  
FIGURE 3 - ATTACHING / ADJUSTING THE  
ADJUSTABLE ANGLE GROWTH  
BRACKET  
3
 
LIMITED WARRANTY  
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO  
PRODUCTS MANUFACTURED AFTER JULY 4, 1975.  
This wa rra nty is e xte nde d only to the origina l purc ha se r/use r of our produc ts.  
This wa rra nty give s you spe c ific le ga l rights a nd you ma y a lso ha ve othe r le ga l rights whic h va ry from  
sta te to sta te .  
Inva c a re wa rra nts its p rod uc t to b e fre e from d e fe c ts in m a te ria ls a nd workm a nship for the  
pe riod of two (2) ye a rs of use by origina l purc ha se r. If within suc h wa rra nty pe riod a ny suc h  
produc t sha ll be prove n to be de fe c tive , suc h produc t sha ll be re pa ire d or re pla c e d, a t Inva c a re 's  
option. This wa rra nty doe s not inc lude a ny la bor or shipping c ha rge s inc urre d in re pla c e me nt pa rt  
insta lla tion or re pa ir of a ny suc h produc t. Inva c a re 's sole obliga tion a nd your e xc lusive re me dy unde r  
this wa rra nty sha ll be limite d to suc h re pa ir a nd/or re pla c e me nt.  
For wa rra nty se rvic e , ple a se c onta c t the de a le r from whom you purc ha se d your Inva c a re  
produc t. In the e ve nt you do not re c e ive sa tisfa c tory wa rra nty se rvic e , ple a se write dire c tly to  
Inva c a re a t the a ddre ss on the ne xt pa ge . Provide de a le r's na me , a ddre ss, mode l numbe r, da te of  
purc ha se , indic a te na ture of the de fe c t a nd, if the produc t is se ria lize d, indic a te the se ria l numbe r.  
Inva c a re Corpora tion will issue a re turn a uthoriza tion. The de fe c tive unit or pa rts must be re turne d for  
wa rra nty inspe c tion using the se ria l numbe r, whe n a pplic a ble , a s ide ntific a tion within thirty (30) da ys of  
re turn a uthoriza tion da te . DO NOT re turn produc ts to our fa c tory without our prior c onse nt. C.O.D.  
shipme nts will be re fuse d; ple a se pre pa y shipping c ha rge s.  
LIMITATIONS AND EXCLUSIONS: THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL  
WEAR OR FAILURE TO ADHERE TO THE ENCLOSED INSTRUCTIONS. IN ADDITION, THE FOREGOING WARRANTY  
SHALL NOT APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED;  
PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT, IMPROPER OPERATION, MAINTENANCE OR STORAGE;  
OR PRODUCTS MODIFIED WITHOUT INVACARE'S EXPRESS WRITTEN CONSENT INCLUDING, BUT NOT LIMITED  
TO: MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS: PRODUCTS DAMAGED  
BY REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE; PROD-  
UCTS DAMAGED BY CIRCUMSTANCES BEYOND INVACARE'S CONTROL; PRODUCTS REPAIRED BY ANYONE  
OTHER THAN ANAUTHORIZED INVACARE DEALER, SUCH EVALUATION SHALL BE SOLELY DETERMINED BY  
INVACARE.  
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, IF ANY, INCLUD-  
ING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE.  
IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE  
REMEDY FOR VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF  
THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. INVACARE SHALL NOT BE LIABLE  
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.  
THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.  
Invacare Corporation  
USA  
Canada  
One InvacareWay  
Elyria, Ohio USA  
44036-2125  
800-333-6900  
5970 Chedworth Way  
Mississauga, Ontario  
L5R 3T9, Canada  
905-890-8838  
Invacare and "Yes,you can" are trademarks of Invacare  
Corporation.  
© 2000 Invacare Corporation  
Form No. 96-324 Part No. 1068857 Rev A (1) 7/00  
 

Intel Network Card 82540EP User Manual
Intel Personal Computer BOXD34010WYK User Manual
IOGear Switch GCS922U User Manual
Jenn Air Cooktop JGC9430 User Manual
Jenn Air Dishwasher DU460 User Manual
JVC Camcorder LYT2046 001A M User Manual
JVC Car Stereo System Model KD S576 User Manual
Jwin Flat Panel Television JV DTV17 User Manual
Karcher Pressure Washer K 5700 User Manual
Kettler Home Gym Trainer User Manual